1 this low profile box header is best suited for high-density, low-cost internal connections in office automation equipment. features ?interchangeability this header was designed to mate with the receptacle side of connectors conforming to mil-c-83503, including jst? ra connector. ?low cost the posts are selectively gold-plated at their mating end and tin-plated on their solder side. this reduces costs without hampering the connector's effectiveness. (headers with completely tin-plated contacts are also available.) ?low-profile the header has a low profile with a mounting height of 19.0mm when a plug with a strain relief is used. this height is approximately 10.0mm lower than the mounting height of the conventional mil-c-83503 header and thus maximizes the efficient use of space in electronic equipment. ?no contamination by flux or cleaning fluids sufficient stand-off area is provided to prevent flux and cleaning fluid contamination. specifications ?current rating: 1.0a ac, dc ?voltage rating: 300v ac, dc ?temperature range: (including temperature rise in applying electrical current) -55?c to +125?c(gold-plated) -55?c to +105?c(tin-plated) ?applicable pc board thickness: 1.6mm * rohs compliant products are published. * refer to "general instruction and notice when using terminals and connectors" at the end of this catalog. * contact jst for details. standards 0 recognized e60389 1 certified lr20812 rk header shrouded headers 2.54mm pitch
2 connector 13.2 b a 2.54 5.08 0.64 polarizing mark polarizing key guide groove 0.5 8.9 (16.2) 3.0 2.54 13.2 0.64 polarizing mark polarizing key guide groove 0.5 8.9 (15.74) 2.54 b a 2.54 5.08 2.54 2.7 cir- cuits model no. dimensions (mm) q'ty / box gold-plated header tin-plated header top entry type side entry type guide groove ab polariz- ing key top entry type side entry type material and finish 14 34 40 rk-h141td-0130 rk-h341td-0130 rk-h401td-0130 rk-h141sd-0110 RK-H341SD-0110 rk-h401sd-0110 rk-h141td-0190 rk-h341td-0190 rk-h401td-0190 rk-h141sd-0190 rk-h341sd-0190 rk-h401sd-0190 1 1 1 1 2 2 15.24 40.64 48.26 25.40 50.80 58.42 100 50 50 post: gold-plated product: side entry type; brass, nickel-undercoated, mating part; gold-plated, insulation displacement part; tin-plated (reflow treatment) top entry type; brass, nickel-undercoated, overall; gold-plated tin-plated product: brass, copper-undercoated, tin-plated (reflow treatment) housing: pbt, ul94-0, black top entry type side entry type pc board layout (viewed from soldering side) and assembly layout 5.08min. 2.54 0.05 1.0 +0.1 0.05 3.43min. 2.54 0.05 when ra receptacle is mated 3.43min. 8.9 (16.2) (19.0) 3.0 when ra receptacle is mated 13.2min. 8.9 (19.0) 13.2min. 2.54 0.05 5.08min. 2.54 0.05 1.0 +0.1 0.05 note: 1. tolerances are non-cumulative: 0.05mm for all centers. 2. hole dimensions differ according to the kind of pc board and piercing method. the dimensions above should serve as a guidel ine. contact jst for details. rohs compliance this product displays (lf)(sn) on a label. (except gold-plated product, top entry type) top entry type side entry type rk header
|